PM WDM FOR 2 µm OPERATION
Fused Fiber WDM
The Gooch & Housego fused PM WDM, combines multiple wavelengths of light in PM fiber whilst maintaining polarization
G&H proprietary PM manufacturing technology provides low loss, with high polarization extinction ratio. The all fiber construction offers excellent reliability and high power handling characteristics.
These high performance parts are available in many wavelength configurations, housing, fiber and connector options and can therefore be readily specified in a wide variety of applications, enabling rapid design cycles and new project builds.
In common with all PM components, it is necessary to launch into either the slow or the fast axis to maintain polarization. For the G&H PM WDM, specifications are based on slow axis launch, although fast axis versions are also available if requested.
Key Features
• Low loss
• High PER
• High power handling
• PM fiber on all ports
• Slow axis operation as standard
• Fast axis operation available on request
Applications
• Telecoms
• Instrumentation
• IR Imaging
• Biomedical
• Industrial
• Defense
• IR counter measures
Typical Optical Specifications3
Wavelength
Available
Housing
CH1
Insertion
Loss1 (dB)
CH2
Insertion
Loss1 (dB)
CH1
PER5
CH2
PER5
CH1
CH2
Spacing4
Max (Typ)
Max (Typ)
1900-2100 nm
1900-2100 nm
>50 nm
3, 7,C
1.0 (0.5)
1.0 (0.5)
>15 dB
>15 dB
<1900 nm2
1900-2100 nm
-
3, 7,C
1.0 (0.5)
1.0 (0.5)
>15 dB
>15 dB
1 Insertion loss specified at center wavelength and room temperature.
2 <1900 nm wavelength range may be below the 2nd order mode cut-off for the fiber used to manufacture this product type. Performance specified for single-mode incident on this path.
3 Custom specifications available on request.
4 For wavelength spacing <50 nm, please contact the sales office.
5 Stated value may not be guaranteed for some wavelength combinations.
Parameter
Specification
Return loss/directivity1
55 dB
Pigtail tensile load
5 N
Optical power handling2,3
4 W
Operating/storage temperature range
–5 – +75°C/-40 – +85°C
Fiber type4
PM PANDA fiber
1 Measured reference port P3 input for signal wavelength, P2 input for pump wavelength and P1 input for signal and pump wavelengths.
2 For operation at powers of greater than 4 W the component housing and fiber must be adequately heat-sunk (for additional information contact G&H sales). Components intended for high power operation are only available in the 2x2 configuration. Component performance and reliability under high power must be determined within the customer system.
3 The performance and reliability of optical connectors is not guaranteed for optical powers of greater than 1 W.
4 Various fiber types available, please contact G&H sales for additional information.
Housing Option
Housing Code
Description
Max Dimensions (mm)
Pigtai
3
Regular
3.0
(∅) x
85 (L max)
Primary-coated fiber
7
High power
5 (W) x 5
(H) x 85 (L max)
Primary-coated fiber
C
Regular high power
3.0
(Ø) x 85 (L max)
Primary-coated fiber
Configuration
Typical Optical Performance
Order code
Order codes are comprised of a standard device prefix (e.g. FPW) followed by code letters or numbers which correspond to available options.
Sample: FPW-Y40Z50230 (PM fused fiber WDM, 1940/2050 nm wavelengths, 2x2 port configuration regular housing, no connectors).
1 Insertion loss in specification table does not include connector losses.
2 Pigtail length 1 m (minimum). Further pigtail lengths available on request. Where connectorized, pigtail length is to the connector face.
3 7 & C not available in 1x2 Port Configuration. For more information contact G&H sales.
4 To request connectors please contact G&H sales.
商品属性 [波长] 1900 nm,2100 nm