PY-III-HR-C-A
SP90405
Pyroelectric array detector, chopped, Grade A, one Gigabit Ethernet port, BeamGage Professional GigE to USB3 adaptor, hard shipping case, 3 meter GigE cable, and power supply w/locking connector included.
Pyrocam IIIHR Beam Profiling Camera
High-Resolution 80µm pixel pitch
Integrated Chopper for CW Beams
Interchangeable Windows for a Wide Variety of Applications
BeamGage professional software included
Application
UV and IR MIR(1)
Spectral response
13 - 355nm 3 - 5µm
1.06 - 3000µm
Interchangeable windows
See selection in Ordering section
Detector array details
Active area
12.8mm x 12.8mm
Element spacing
80µm x 80µm
Number of elements
160 x 160
Pixel size
75µm x 75µm
CHOPPED CW OPERATION
Chopping frequencies
25Hz, 50Hz
Sensitivity (RMS noise limit)
64nW/pixel (25Hz)
96nW/pixel (50Hz)
1.0mW/cm² (25Hz)
1.5mW/cm² (50Hz)
Noise equivalent power (NEP)
13nW/Hz 1/2 /pixel (1Hz)
Saturation power
3.0W/cm²(25Hz) 4.5W/cm² (50Hz)
Damage threshold power
Over entire array
2W
Peak Power Density
8W/CM² (Chopped mode)4W/CM² (CW in pulsed mode)
PULSED OPERATION
Laser pulse rate
Single-shot to 1000Hz
Pulse width
1fs - 12.8ms
Sensitivity (peak noise limit)
0.5nJ/pixel 8µJ/cm²
Saturation energy
15mJ/cm²
Damage threshold
20mJ/cm² (1ns pulse)
600mJ/cm² (1 ms pulse)
Trigger input
High logic level
3.5 - 6.0V DC
Low logic level
0 - 0.8V DC
Pulse width
4µs min
Trigger
Supports both trigger and strobe out
Photodiode trigger
InGaAs response: SP90409
OPERATING CONNECTIONS AND CONDITIONS
Power
12VDC
Line frequency
60/50Hz External Supply
Power consumption
12W
Operating temperature
5°C to 50°C
PHYSICAL
Case Dimensions
140mm H X 130mm W X 60mm D
Detector Position
Centered in width 35.6mm from bottom 15.43 ± .75mm behind front cover
(without included C-mount attached) Tilt <2º
Weight
0.85Kg (1.83lbs); not including power supply
PC interface
Gigabit Ethernet (IEEE 802.3ab), GigE Vision complian
MEASUREMENTS PERFORMED
Comes with BeamGage PRO
Extensive set of quantitative and image display capabilities. See BeamGage data sheet.
Array Quality
Grade A <50 bad pixels,all correctable No uncorrectable cluster
Drawings
Ordering
PY-III-HR-C-A
SP90405
Pyroelectric array detector, chopped, Grade A, one Gigabit Ethernet port, BeamGage Professional GigE to USB3 adaptor, hard shipping case, 3 meter GigE cable, and power supply w/locking connector included.
PY-IIIHR-C-MIR PRO
SP90415
Pyroelectric array detector, chopped, Grade A, one Gigabit Ethernet port, BeamGage Professional GigE to USB3 adaptor, hard shipping case, 3 meter GigE cable, and power supply w/locking connector included.
SP90429
How to become a great user of the world’s most powerful laser beam analysis software
商品属性 [波长] 13-355nm, 1.06-3000μm [光束尺寸] 1600μm - 12.3mm [兼容的光源] CW, Pulsed [传感器] Pyroelectric Array