BSQ-SP300-A
SP90443
BeamSquared software, software license, SP300 USB 3.0 camera, optical train, automatic and manual operation, recommended for 266nm - 1100nm wavelengths.
BeamSquared
IֺֺSO compliant
Automatically measure your beam quality in under 1 minutes
Tune your laser for best operation
Specifically developed for continuous usage
Unequaled accuracy using patented Ultracal™ Calibration
Long optical train & automatic attenuation adjustment
Flexible mounting configurations, install horizontal or vertically
Pulsed and CW for most beam diameters and powers
Compact and portable
Detectors from 266nm to 10.6μm
The BeamSquared system is a compact and fully automated tool for measuring the propagation characteristics of CW and pulsed laser systems from the UV to NIR to Telecom wavelengths. Users can also measure wavelengths above 1.8 microns, including CO2 and terahertz in manual mode (a bench set-up; without the automated optical train) with a Pyrocam IV or IIIHR. Our longer optical train and patented UltracalTM Calibration makes BeamSquared the most accurate product on the market and is ISO 11146 compliant. Its operational robustness and reliability ensures continuous use applications in industry, science, research and development.
Automatic M2 - at Production Speeds
The Beam Squared optical train uses a fixed position lens with movable mirrors and camera. The mirrors that direct the focused beam into the camera are moved to precise locations, translating the beam through the near field, the waist, and the far field regions. All these measurements and translations, as well as incremental beam attenuation, are automatically controlled by the BeamSquared software. Design improvements in the BeamSquared system have decreased the measurement reporting time by 2-3 times, making it possible to report M2 in under a minute.
Manual M2
Manual mode is available for wavelengths greater than NIR, particularly Terahertz and above, and for beams that are too large or too small for the BeamSquared optical system. Users are required to provide a manual translation/attenuation apparatus.
Features
Supports both automated and manual runs
New Hardware
Camera Options include: SP300, Xeva, Pyrocam III HR or IV
RF Lens Reader
ֺ Lens must be present for operation
ֺ Lens configuration data stored with lens (Focal length, calibration wavelength, material, etc.)
Shutter only open when in live mode
Table and attenuator calibration at startup (homing before each run)
Supports hardware Trigger
Faster run times than M2-200s
New Interface
Selectable theme colors
Splash screen with progress bar
2D display
Selectable Color Palette
Manual Cursor when not running (Cursor at centroid otherwise)
Caustic Display
Selecting individual frames
Auto Aperture
Exclude points from run
Run Info Display
Displays Caution Notice when beams are non-conforming: (too dark, too bright, misaligned, too large or too small)
Option to ignore misaligned beams
Editable Settings (Wavelength, Laser to box distance, Laser to lens and focal length in manual mode)
Calculations
Frame Results (Total, Min, Peak, % in Aperture, Avg Pwr Density, Beam Width, Centroid, Peak, Cross Sectional Area)
Laser Results (Waist Width, Divergence, Waist Location Rayleigh Length, M2, K, BPP, Astigmatism, Asymmetry)
After Lens Results (Waist Width, Divergence, Waist Location Rayleigh Length, Astigmatism, Asymmetry)
Effective Focal Length of lens
Fitted/Measured Divergence
Supported Beam Width calculations
ֺ D4 Sigma
ֺ Knife Edge 10/90 and Programmable
ֺ EPSA - Encircled Power Smallest Aperture (power in a bucket)
Multiple Runs
Result statistics
Progress Indicator
Single Page Report
Setup information
Results
Statistics
Caustic chart
Logging/Export data
.CVS File
Drawings
Ordering
BSQ-SP300-A
SP90443
BeamSquared software, software license, SP300 USB 3.0 camera, optical train, automatic and manual operation, recommended for 266nm - 1100nm wavelengths.
BSQ-XC-130-A
SP90444
BeamSquared software, software license, XC-130 USB 2.0 camera, optical train, automatic and manual operation, recommended for 900nm - 1700nm wavelengths.
BSQ-A
SP90445
BeamSquared software, software license, and optical train no camera included. For use with compatible cameras purchased. Compatible camera must be return to factory for upgrade at no additional charge. If, upon inspection the camera does not meet specifications, a repair change will be applicable.
BSQ-PY-M
SP90410
BeamSquared software and software license for manual M2 measurement using a Pyrocam camera (optical train and Pyrocam camera not included)
商品属性 [波长] 266 - 1100nm, 650-1700nm [传感器] Silicon CCD, InGaAs CCD