CW Laser Control Unit AP-CU-CW1
The CW Laser Control Unit provides the power supply and control signals to AdValue Photonics’ CW fiber laser modules, making operating the CW fiber laser modules as turn-key systems. Users are able to control the laser modules through the user interface on the front and back panels of the Control Unit.
General Characteristics:
Parameter
Specification
Power requirement
AC 100~240 V (50/60Hz)
Laser Output Power ON/OFF and
Modulation Control
User to provide 5V TTL signal through a BNC connector on the back panel for laser ON/OFF and output power modulation. 5V TTL signal rise edge triggering ON and fall edge triggering OFF, max. modulation frequency 500 Hz.
Laser output power adjustment
10-100% max. power adjustment using a manual knob on the front panel.
Laser power setting reference
Power setting reference by voltage reading across two terminals on the back panel.
(For special requirement, please contact AdValue Photonics for options.)
Mechanical Outline:
描述 [描述] 为AdValue Photonics的连续波光纤激光器模块提供电源和控制信号