PicoFYb 1064
Picosecond Yb seeder
• SAM mode-locked all PM fiber setup
• User friendly turnkey operation, alignment-free setup
• Robust and reliable, compact design
• Optics and electronics in just one box
• 12V DC power supply with lowest power consumption
The PicoFYb laser systems are PM fiber-based picosecond oscillators using SAM mode-locking techniques for seeding industrial laser systems, e.g. for micro-machining. The PicoFYb laser pulses with excellent amplitude and frequency jitter parameters are amplified to typical multi-Watt levels in the MOPA (master oscillator, power amplifier) laser or regenerative amplifier systems of our customers. Typical amplifiers are slab, rod and disc lasers operating in the 1 µm wavelength regions.
Applications
• Seeding of Yb:YAG amplifiers • Metrology
Options
Options (possible for OEM quantities – not for single units)
• 1060 to 1070 nm center wavelength • Up to 60 mW output power
• 15 to 80 MHz repetition rate • 2 to 10 ps pulse duration
SwitchBox
The FemtoFiber pro SwitchBox is a small tool for quick starters. It provides all switches, supply and status lines to run a PicoFYb as a stand-alone system without integration environment and therefore is especially recommended for single-system users.
Specification
Wavelength
1064 nm
Pulse Width
< 10 ps
Laser Output Power
> 10 mW
Repetition Rate
20 MHz
Spectral width
< 0.5 nm
Time-Bandwidth-Product
0.5 (typ.)
RF side mode supression
> 50 dBc
Peak-to-peak noise
< 3 %
Output coupling
SM PM fiber pigtail with narrow key FC/APC connector, length >35cm
Dimensions laser head
50 x 135 x 194 mm³
Weight laser head
< 2 kg
Power supply
12 VDC
Power consumption
< 10 Watt
PC Interface
USB
Environment temperature
15 - 40 °C (operating), 0 - 40 °C (storage and transport)
Environment humidity
Non-condensing
商品属性 [波长] 1064 nm [功率] > 10 mW [脉宽] < 10 ps [输出类型] 脉冲 [重复频率] 20 MHz