FemtoFErb 1950
Compact 1.95 µm seed laser source
• Frequency shifted Er-doped fiber laser • Short pulse emission < 100 fs @ 1950 nm • Alignment-free all-fiber setup, use of PM fibers only
• SAM mode-locking technology • Compact design: optics and electronics just in one box
The FemtoFErb 1950 laser is a very robust all fiber-based femtosecond laser system with excellent amplitude and frequency jitter parameters. A more than 50 nm wide-spanning frequency shifted output spectrum centered at 1950 nm is generated with a highly nonlinear fiber. This laser unit can be used as a high reliable and cost-effective seed source for e.g. Thulium or Holmium based amplifier systems.
Applications
• Seeding for Thulium/Holmium amplifier systems
Options
SwitchBox
The FemtoFiber pro SwitchBox is a small tool for quick starters. It provides all switches, supply and status lines to run a PicoFYb as a stand-alone system without integration environment and therefore is especially recommended for single-system users.
Specification
Wavelength
1950 nm*
Pulse Width
< 100 fs
Laser Output Power
> 30 mW
Repetition Rate
30 MHz
*) other center wavelength possible, on request
Output coupling
SM/PM-Fiber (narrow key FC/APC receptacle)
Dimensions laser head
69 x 122 x 202 mm3
Weight laser head
< 2.2 kg
Power supply
12 VDC
Power consumption
< 20 Watt
PC Interface
USB
Environment temperature
15 - 40 °C (operating), 0 - 40 °C (storage and transport)
Environment humidity
Non-condensing
商品属性 [波长] 1950 nm [功率] > 30 mW [脉宽] < 100 fs [输出类型] 脉冲 [重复频率] 30 MHz