iKon-M 912
Andor’s iKon-M 912 cooled back-illuminated CCD camera is designed to offer the ultimate in high dynamic range, low noise performance. The 512 x 512 CCD array with 24 μm pixels has been optimized for extremely high well depth and maximum photon collection per pixel.
300,000 e- well depth
TE cooling to -100°C
QE max > 90 °C from back-illuminated sensor
Ultra low noise readout
Multi-Megahertz pixel readout
UltraVac™
Overview
Very High Well Depth and Superb Photon Collection
Andor’s back-illuminated iKon M 912 camera offers the ultimate in dynamic range and photon sensitivity, by virtue of a large 24 μm, high well depth pixel architecture. The camera also offers a QEmax of 95% and exceptionally low readout noise.
The iKon-M 912 benefits from negligible dark current with industry-leading thermoelectric cooling down to -100°C, enabling use of significantly longer exposure times than offered by any other camera on the market using this same sensor. The iKon-M platform offers Multi-Megahertz readout for more rapid acquisition or fast focusing, along with direct USB 2.0 connectivity to PC.
Specifications
Key Specifications Active Pixels
512 x 512
Sensor Size
12.3 x 12.3 mm
Pixel Size
24 μm x 24 μm
Active area pixel well depth (typical)
300,000 e-
Max. Readout Rate
5 MHz
Read Noise
3 e-
Maximum Cooling
-100 °C
Frame Rate
14.4 fps (full frame)
Features and Benefits
Features Benefits 24 µm pixels
The large 24 µm pixels are designed with maximum well and photon collection area in mind.
Unparalleled thermoelectric (TE) cooling performance
Negligible dark current, without the aggravation or safety concerns associated with LN2. Market-exclusive TE cooling specs of -100°C with 10°C water chiller/recirculator available from Andor); -80°C with air-cooling via integrated low-noise fan.
Up to 95% QE
Back-illuminated sensors available for maximum photon capture and higher S/N ratio.
UltraVac™
Proprietary and proven vacuum process, critical for sustained vacuum integrity, sensor protection and unequalled cooling, year after year.
Ultra low-noise readout
Down to 2.5 electrons rms with intelligent low-noise electronics, offering the most "silent" system noise performance available.
Software selectable readout speeds (up to 5 MHz)
Faster readout for focusing and following dynamic events, slower readout for absolute minimal noise performance.
High quantitative dynamic range
16-bit scientific grade A/D, quantifying both strong and very weak signals in a single frame.
Single window design
Maximum photon throughput.
Software selectable pre-amp sensitivity
User configurable system optimization.
External trigger
TTL input and output for synchronization to experimental events.
Integrated C-mount shutter
Avoid vertical smear during readout.
USB 2.0 PC interface
"Plug and Play" connectivity direct from camera to PC.
Windows, Linux & Labview
Andor’s user-friendly SDK supports both Windows and Linux OS. Labview VI package available
Integrated into EPICS
Platform is fully integrated into the EPICS control software
Graphs
Graphs and Drawings
QE Curve
Connector Panel
Dimensions - Front
Dimensions - Side
Dimension - Top
商品属性 [Active pixels ] 512 x 512 [Pixel Size] 24 μm x 24 μm [Frame Rate] 14.4 fps (full frame)