DFB laser diodes from920 nm to1100 nm
nanoplus single mode laser diodes
nanoplus is the only manufacturer world- wide routinely providing single and multi mode lasers at any wavelength from 760 to 6000 nm. At wavelengths up to 14 μm, QCLs complete nanoplus’ laser portfolio. Our patented distributed feedback laser diodes deliver single mode emission with well defined optical properties enabling a wide range of applications.
nanoplus lasers operate reliably in tens of thousands of installations worldwide, including chemical and metallurgical in- dustries, gas pipelines, power plants, med- ical systems, airborne and satellite applica- tions.
key features
• very high spectral purity
• narrow linewidth typically < 3 MHz
• excellent reliability
• wide variety of packaging options
• customer-specific designs available
Application areas
• high performance gas sensing for process and environmental control
• precision metrology
• atomic clocks
• spectroscopy
• space technology
nanoplus lasers with excellent performance are specifically designed and characterized to fit your needs. This data sheet summarizes typical properties of nanoplus DFB lasers in the range from 920 nm to 1100 nm. Overleaf data for lasers used for injection seeding of Nd:YAG lasers is given as an example. These lasers have applications in e.g. remote sensing of wind speeds, profiling of atmospheric molecules and aerosols and topographic mapping.
general ratings (T = 25 °C)
symbol
unit
typical
optical output power
Pout
mW
20
typical maximum operating voltage
Vop
V
2
forward current
If
mA
50
side mode suppression ratio (SMSR)
dB
> 35
On request, lasers with specifically optimized proper- ties, e. g. higher output power, are available.
laser packaging options
TO5.6 header with or without cap
TO5 header with TEC and NTC
butterfly housing with SM or PM fiber
nanoplus DFB laser diodes at 1064nm
A wide variety of gas molecules exhibit characteristic absorption lines in the near infrared.The wavelength of the main Nd:YAG laser transition is at 1064 nm.
The 1064 nm DFB laser diodes are used for injection seeding of Nd:YAG lasers, which have applications in remote sensing of wind speeds, profiling of atmospheric molecules and aerosols and topographical mapping. Applications of this type rely on Nd:YAG lasers, which are seeded with highly stable laterally and longitudinally single mode lasers. This data sheet reports performance data of nanoplus DFB lasers at this wavelength. Similar performance data are obtained in the entire wavelength range from 920 nm to 1100 nm.
Fig. 1 Room temperature cw spectrum of a nanoplus DFB laser diode operating at 1064 nm
In many applications, tempera- ture and/or current variations are used to adjust the laser emis- sion precisely to the target wavelength.
Fig. 2 Mode hop free tuning of1064nm based DFBs by current variation at different temperatures
electrooptical characteristics (T = 25 °C)
symbol
unit
min
typ
max
cpeak wavelength
λ
nm
1063
1064
1065
threshold current
Ith
mA
15
20
25
temperature tuning coefficient
CT
nm / K
0.07
0.08
0.09
current tuning coefficient
CI
nm / mA
0.01
0.02
0.025
slow axis (FWHM)
degrees
12
15
20
fast axis (FWHM)
degrees
35
40
45
emitting area
W x H
μm x μm
2.3 x 1.4
2.5 x 1.5
2.5 x 1.7
storage temperatures
TS
°C
- 40
+ 20
+ 80
operational temperature at case
Tc
°C
-20
+ 25
+ 50
商品属性 [波长] 920 nm-1100 nm [激光器类型] DFB