DFB laser diodes from1650 nm to1850 nm
nanoplus single mode laser diodes
nanoplus is the only manufacturer world- wide routinely providing single and multi mode lasers at any wavelength from 760 to 6000 nm. At wavelengths up to 14 μm, QCLs complete nanoplus’ laser portfolio. Our patented distributed feedback laser diodes deliver single mode emission with well defined optical properties enabling a wide range of applications.
nanoplus lasers operate reliably in tens of thousands of installations worldwide, including chemical and metallurgical in- dustries, gas pipelines, power plants, med- ical systems, airborne and satellite applica- tions.
key features
• very high spectral purity
• narrow linewidth typically < 3 MHz
• excellent reliability
• wide variety of packaging options
• customer-specific designs available
Application areas
• high performance gas sensing for process and environmental control
• precision metrology
• atomic clocks
• spectroscopy
• space technology
nanoplus lasers with excellent performance are specifically designed and characterized to fit your needs. This data sheet summarizes typical properties of nanoplus DFB lasers in the range from 1650 nm to 1850 nm. In this wavelength range e.g. methane, nitric oxide and hydrogen chloride can be detected
with high sensitivity. Overleaf data is given as an example for DFB lasers used for high sensitivity HCl sensing
general ratings (T = 25 °C)
symbol
unit
typical
optical output power
Pout
mW
5
typical maximum operating voltage
Vop
V
2
forward current
If
mA
70
side mode suppression ratio (SMSR)
dB
> 35
On request, lasers with specifically optimized proper- ties, e. g. higher output power, are available.
laser packaging options
TO5.6 header with or without cap
TO5 header with TEC and NTC
butterfly housing with SM or PM fiber
nanoplus DFB laser diodes at 1742nm
A wide variety of gas molecules exhibit characteristic absorption lines in the near infrared.DFB lasers emitting at 1742 nm are highly suited for sensitive detection of small HCl concentrations. For this application, highly stable laterally and longitudinally single mode lasers are required.
This data sheet reports performance data of nanoplus DFB lasers at this wavelength. Similar performance data are obtained in the entire wavelength range from 1650 nm to 1850 nm.
Fig. 1 Room temperature cw spectrum of a nanoplus DFB laser diode operating at 1742 nm
In many applications, tempera- ture and/or current variations are used to adjust the laser emis- sion precisely to the target wavelength.
Fig. 2 Mode hop free tuning of 1742 nm based DFBs by current variation at different temperatures
electrooptical characteristics (T = 25 °C)
symbol
unit
min
typ
max
cpeak wavelength
λ
nm
1741
1742
1743
threshold current
Ith
mA
20
35
65
temperature tuning coefficient
CT
nm / K
0.07
0.1
0.14
current tuning coefficient
CI
nm / mA
0.008
0.02
0.03
slow axis (FWHM)
degrees
20
30
40
fast axis (FWHM)
degrees
40
50
60
emitting area
W x H
μm x μm
2 x 1
3x 1.5
5x 2
storage temperatures
TS
°C
- 40
+ 20
+ 80
operational temperature at case
Tc
°C
-20
+ 25
+ 50
商品属性 [波长] 1650 nm-1850 nm [激光器类型] DFB