1064nm FBG Stablized Laser Source, 200mW, SM Output Connector
The Amonics Fiber Coupled Laser source uses internally pigtailed laser diodes that are controlled by Thermal Electric Cooler (TEC) and high precision current source. Its operating wavelength is further stabilized by a built-in Fiber Bragg Grating (FBG) device. These laser sources feature narrow spectral line width, low Relative Intensity Noise (RIN) and excellent output power stability. An optional single-mode isolator greatly reduces optical back-reflection to the laser source to further minimize system noise. The laser can also be digitally modulated to 100 kHz (optional). Feature:
- Fiber Bragg Grating (FBG) built-in
- Single Mode (SM) output
- 0.02dB stability over 8 hours
- 10 year+ operating life
Technical Specifications
Model Number
AFP-1064-200-B
Laser Type
14-Pin Butterfly, FBG Stabilized
Center Wavelength
1064nm ± 1nm
Output Power
> 180mW w/o isolator, > 120mW w/ isolator
Polarization Extinction Ratio
NA
Laser Linewidth
1nm maximum
TEC Cooled
Yes
Optical Isolator
30dB typical (Optional)
Output Stability
± 0.02dB over 8 hours
Modulation Bandwidth
CW, 100 kHz (Optional)
Environment / User Interface
Power Supply
80-240 VAC, 43-63 Hz
LCD Display
Output Power, Laser Diode Current, TEC Temperature
Controls
Keylock Switch, Output Power, Laser Current, TEC Temperature
Computer Interface
RS232 Labview
Electrical Connectors
BNC (optional)
Optical Connectors
FC/UPC, FC/APC
Optical Fiber
HI1060
Dimensions
250mm(W) x 300mm(L) x 100mm(H)
Operation Temperature Range
0°C to +40°C
Storage Temperature Range
-10°C to +70°C
商品属性 [波长] 1064nm ± 1nm [功率] 200mW