1455nm Fiber Coupled Source, with FBG, 150mW Output
The Amonics Fiber Coupled Laser source uses internally pigtailed laser diodes that are controlled by Thermal Electric Cooler (TEC) and high precision current source. Its operating wavelength is further stabilized by a built-in Fiber Bragg Grating (FBG) device. These laser sources feature narrow spectral line width, low Relative Intensity Noise (RIN) and excellent output power stability. An optional single-mode isolator greatly reduces optical back-reflection to the laser source to further minimize system noise. The laser can also be digitally modulated to 1MHz (optional). The unit can be customized with Polarization Maintaining (PM) fiber to maintain linear output polarization. Feature:
- Fiber Bragg Grating (FBG) built-in
- Single Mode (SM) or Polarization Maintaining (PM) output
- 0.02dB stability over 8 hours
- 10 year+ operating life
Technical Specifications
Model Number
AFP-1455-150-B
Laser Type
14-Pin Butterfly, FBG Stabilized
Center Wavelength
1455nm ± 1nm
Output Power
150mW minimum
Polarization Extinction Ratio
20dB (with PM Connector option)
Laser Linewidth
1nm maximum
TEC Cooled
Yes
Optical Isolator
30dB typical (Optional)
Output Stability
± 0.02dB over 8 hours
Modulation Bandwidth
CW, 1MHz
Environment / User Interface
Power Supply
80-240 VAC, 43-63 Hz
LCD Display
Output Power, Laser Diode Current, TEC Temperature
Controls
Keylock Switch, Output Power, Laser Current, TEC Temperature
Computer Interface
RS232 Labview
Electrical Connectors
BNC (optional)
Optical Connectors
FC/UPC, FC/APC, PM optional
Optical Fiber
SMF-28 or PM Panda (optional)
Dimensions
250mm(W) x 300mm(L) x 100mm(H)
Operation Temperature Range
0°C to +40°C
Storage Temperature Range
-10°C to +70°C
商品属性 [波长] 1455nm ± 1nm [功率] 150mW