C Band Wavelength Tunable Laser Module, High Performance Version
The TWL-C-HP-M is a wavelength tunable laser module in C band based on integrable tunable laser assembly (ITLA). The TWL-C-HP-M alleviates inventory and costs in high-channel-count DWDM systems by allowing a single device to replace each of the single-channel devices. Full-band tunable assemblies also enable system functionality such as hot back-up and dynamic provisioning in addition to applications of optical regeneration and wavelength conversion, with the HP version also including a built-in sweep function for continuous scanning applications. The TWL-C-HP-M has a low Relative Intensity Noise (RIN), a high Side-Mode Suppression Ratio (SMSR), an ultra narrow linewidth, and excellent wavelength accuracy. Its RS232 control complies to OIF ITLA Multi Source Agreement (MSA) standard, with a provided GUI software for intuitive control of the wavelength and optical power. The TWL-C-HP-M can be used for Dense Wavelength Division Multiplexing (DWDM) optical transceivers and DWDM discrete line card designs.
Features
➤ Wide wavelength tuning range 1527.6-1567.13nm
➤ Precise Wavelength step resolution of 1 MHz
➤ High optical output power of 50 mW
➤ Ultra narrow laser line width < 10 kHz
➤ Continuous wavelength sweeping function
➤ Excellent Side Mode Suppression Ratio of 55 dB
➤ Polarization Maintaining (PM) output
➤ Intuitive and easy to use USB interface
Technical Specifications
General Specifications
Operating Wavelength
1527.60 to 1567.13nm
Wavelength Accuracy
± 1.5 GHz
Fine Tune Wavelength Resolution
1 MHz
Wavelength Stability
± 1pm over 24 hours
Output Power
50mW typ.
Output Stability
0.02 dB over 8 hours
Linewidth (FWHM)
< 10 kHz instantaneous w/o dither < 100 kHz with SBS disabled < 750 MHz w/ SBS enabled
Carrier to Noise Ratio (CNR)
50 dBc typ. @ -5 dBm
Side Mode Suppression Ratio
55 dB typ.
Relative Intensity Noise (RIN)
-157 dB/Hz @ 13 dBm
Polarization Extinction Ratio
20 dB min.
Optical Isolation
30 dB min.
Fiber Type
Panda 1550 PM Fiber
Mechanical Specifications
Power Supply Requirements
100-240 VAC
Optical Connectors
PM Narrow Key FC/APC Standard, additional types available upon request
Operating Temperature (TQ)
0°C to +40°C
Storage Temperature
-40°C to +70°C
Control
Output Power Level and Wavelength via GUI software
vCommunication Interface
RS232, via DB9 serial or USB 2.0
Accessory
PS-12-M, 12V power supply.
Local Alarm
Over Temperature, Current Overflow
Dimensions
120mm x 112mm x 32mm
商品属性 [可调波长范围] 1527.60 to 1567.13nm [波长分辨率] 1 MHz [波长稳定度] ± 1pm over 24 hours [输出功率] 50mW typ.