37 dBm, C-Band Fiber Amplifier, Rackmount, Four Outputs
Optilab’s EYDFA series is a Er/Yb Doped Fiber Amplifier that utilizes multimode laser pumping, all-fiber combiner and Erbium/Ytterbium double-clad, largecore fiber technologies to achieve high output power in conjunction with low cost. The output level of the EYDFA amplifier exceeds 10 W in CW operation, and adding an optional input stage EDFA allows a low input signal level of -25 dBm.
Options
• Adding a Input stage EDFA to allow low input signal level of -25 dBm
• Installing an ASE (Amplified Spontaneous Emission) filter for pulse amplification
• Output power monitoring
• Polarization Maintaining (PM) fiber design
Features
• High output power of up to 37 dBm
• Customizable for various application
• Control with RS-232 interface
• 1 year warranty
Technical Specifications
Model Number
EYDFA-37-4
Wavelength Range
1535-1565nm
Output Power
+34 dBm to +40 dBm
Input Signal Level
-6 to +6 dBm; -25 dBm to 0 dBm (with pre-amp EDFA)
Optical Gain
37dB minimum @ 0dBm input
Noise Figure
5.0dB typical
Input Isolation
30dB minimum
Output Isolation
30dB minimum
Polarization Dependent Gain
0.3dB maximum
Control Modes
ACC
Environment / User Interface
Display
LCD: Output Power, Pump Laser Temperature
Controls
Keylock Switch, Optical Output Power, Laser Drive Current
Monitors
Laser Temperature, Laser Drive Current, Loss of Signal (LOS)
Protection
Laser Overheat Warning
Computer Interface
RS232 (Labview software & connection cable included)
Optical Fiber Type
SMF-28
Optical Connectors
FC/APC, FC/UPC, SC/APC, SC/UPC
Electrical Connectors
RS232 - Cable Included
Power Supply
80-240 VAC, 43-63Hz
Dimensions
3RU: 19” x 14.5” x 4.5”
Operating Temperature Range
0ºC to +50ºC
Storage Temperature Range
-30ºC to +70ºC
商品属性 [波长] 1535-1565nm [输出功率] +34 dBm to +40 dBm