33 dBm, Er/Yb Doped Fiber Amplifier, Pulse Mode, Module
The Optilab EYDFA-P-33-M Erbium Ytterbium Doped Fiber Amplifier (EYDFA) Module Pulse Mode is a high-power, versatile amplifier designed for pulse laser CATV/PON networks, optical communication and other general-purpose optical amplification applications. Based on multi-mode pumping Er/Yb double clad fiber technology, EYDFA-P-33-M is designed to produce high output power up to 33 dBm. By using a dual stage design, EYDFA-P-33-M provides optical gain of up to 50 dB (with optional Pre- Amp), while maintaining low noise figure (NF) below 5 dB. The EYDFA-M amplifier produces optical output level of +36 dBm with an input power level range from -20 dBm. Featuring adjustable output level power via ACC through the front panel and software control through USB, this compact module housing ideal for OEM integration applications. Contact Optilab for more information.
Features
• Up to +33 dBm output power
• Input power level -20 dBm (w/ PA)
• Optical gain up to 50 dB with pre-amp
• 200 W Peak Power ( Pulse) mode
• Automatic Current Control (ACC) standard
• LCD digital display and LED status indicators
• Software control through USBApplications
• Pulsed Laser amplifier
• CATV/PON Networks
• Optical Communication
• Test and measurement
• General-purpose optical amplifier
Technical Specifications
Optical Specifications
Model Number
EYDFA-PM-33-M
Operating Range
1540 nm to 1570 nm
Output Power Level
+33 to +36 dBm
Input Power Range
-3 dBm to +7 dBm -20 dBm to +0 dB with optional PA
Optical Gain
40 dB Max. 50 dB with optional pre-amp
Noise Figure (NF)
< 5.0 dB Typical @ -10 dBm Input
Number of Outputs
1 output standard Up to 8 ports
Optical Return Loss
50 dB min.
Input/Output Optical Isolation
30 dB min.
Polarization Mode Dispersion
1.0 ps max.
Polarization Dependent Gain
0.10 dB max.
Output Power Stability
0.10 dB over 8 hours
Input/Output Fiber Type
Corning SMF-28
Pulse Mode Specifications with NPL-1550
Peak Power (100 ns p.w.)
200 W @ 100 KHz rep. rate
Pulse Energy (100 ns p.w)
20 μJ @ 100 kHz rep. rate
Mechanical Specifications
Operating Temperature
-10º C to +60º C
Storage Temperature
-40º C to +70º C
Power Supply Requirements
80 - 240 V, 43 - 63 Hz AC
Power Consumption
60 W max.
Output Level Control
Pump Lasers Current Adjustment
Monitoring
Pump Laser Temperature
Computer Interface
LabVIEW via USB
LCD Display
Input/Output Power Level, TEC Temperature
Alarms
Temperature and Input Power
Optical Connectors
FC/APC, Other Type Optional
商品属性 [波长] 1540 nm to 1570 nm [输入功率] -3 dBm to +7 dBm -20 dBm to +0 dB with optional PA [输出功率] 33 to +36 dBm