HPM-100
Extremely Fast Response
Instrument Response Function (IRF) Down to 18 ps FWHM
High Detection Efficiency
Large Active Area: 3 mm or 6 mm Cathode Diameter
Five Cathode Types Covering 180 nm to 920 nm
No Afterpulsing Background
No Afterpulsing Peak in FCS Measurements
Extremely High Dynamic Range of TCSPC Measurements
Clean IRF: No Tails or Secondary Peaks
High Noise Immunity
Internal Generators for PMT Operating Voltages
Power Supply and Control via DCC-100 or DCU-400 Modules
Overload Protection
Direct Interfacing to all bh TCSPC Systems
Cooled Version with Reduced Dark Count Rate Available
HPM-100
Cathode Type
-06
-07
-40
-42
-50
Wavelength Range / nm 1)
290 - 600
220 - 850
250 - 720
300 - 850
400 - 900
Detector Quantum Efficiency 1)
28 %
@ 400 nm
26 %
@ 290 nm, 18 %
@ 400 nm
45 %
@ 500 nm
22 %
@ 500 nm
20 %
@ 600 nm
Spectral sensitivity
Dark Countrate / s-1, Tcase = 22 °C
100 - 400
100 - 1000
560
800
560
Transit Time Spread
(TCSPC IRF / FWHM)
< 38 ps
120 to 140 ps
125 ps
Max. Count Rate (Continuous)
> 10 MHz
Single Electron Response Width (FWHM, typ. Value)
850 ps
Single Electron Response Amplitude (Vapd 95 % of Vmax) 2)
50 mV
Overload Shutdown
> 15 MHz
Signal Output
Output Polarity
negative
Output Connector
SMA
Output Impedance
50 Ω
Power Supply
(from DCC-100 Card)
+12 V, +5 V, -12 V
General
Cathode Diameter
6 mm
3 mm
3 mm
3 mm
3 mm
Dimensions (Width x Height x Depth)
(60 x 90 x 170) mm
Optical Adapter
C-Mount, DCS-120, LSM 710/780/880 NDD and BIG port
All HPM-100 Detectors are available as Cooled Versions
(1) According to Hamamatsu specifications
(2) Varies with cathode type and manufactering lot
商品属性 [Wavelength Range ] 220-900nm