Industrial High Power Picosecond Lasers
FEATURES
▶ Up to 80 W at 1064 nm
▶ Optional 532 nm and 355 nm wavelengths
(could be all 3 electronically switchable wavelengths)
▶ Up to 1 MHz repetition rate
▶ Up to 200 µJ pulse energy
▶ Short pulse duration 10 ps
▶ Excellent beam quality M²<1.3
▶ Versatile laser control and syncronisation capabilities
▶ Smart triggering for synchronous operation with
polygon scanner and PSO
▶ Monolythic, sealed and rugged design
▶ Low life-time ownership cost
▶ Nanosecond pulse duration mode (optional)
APPLICATIONS
▶ Drilling
▶ Cutting
▶ Patterning
▶ Structuring
▶ Ablation
▶ Dicing
▶ Micromachining
▶ LCD, OLED cutting
▶ Laser induced forward transfer
▶ Sapphire structuring and dicing
▶ Ceramics micromachining
▶ PCD drilling and tracing
▶ Silicon scribing
▶ PET, PP, PTFE, Silicone cutting
and drilling
MATERIALS
▶ Various metals
▶ Brittle materials including glass,
ceramics, sapphire and PCD
▶ Silicon
▶ PET, PP, PI, PTFE
▶ Silicone
▶ PCB
▶ LCD, LED, OLED,
microLED display panels
▶ Solar cells
High-energy and high-power water-cooled Atlantic series picosecond lasers are designed for a variety of industrial applications such as LCD or OLED display cutting and drilling, laser induced forward transfer (LIFT), glass and sapphire processing, micromachining of ultra-hard materials, ablation of metals, cutting and drilling of polymers, silicon scribing, solar cell scribing and many more. Superior beam quality parameters, maximum available average power (80W@IR / 40W@VIS / 30W@UV), maximum available pulse energy (200μJ@IR / 100μJ@VIS / 75μJ@UV) and maximum pulse repetition rate (up to 1MHz) are beneficial where high processing quality and high throughput are required.
To tailor laser performance for specific industrial applications, advanced electronics enable external gating (including PSO), synchronization and precise laser triggering as well as instant signal amplitude control.
To maintain reliability and assure long-term stable operation in an industrial environment, optical components are installed in a sealed, robust, precisely machined monolithic aluminum block. Designed for robust, low maintenance operation, Atlantic series lasers offer maximum reliability due to an optimized layout, PC controlled operation, a built-in self-diagnostic system and advanced status reporting.
Model
Atlantic 6HE
Atlantic 25
Atlantic 50
Atlantic 80
GENERAL SPECIFICATIONS
Central wavelength
Fundamental
1064 nm
With second harmonics option
532 nm (optional 1064 nm output) 2)
With third harmonics option
355 nm (optional 1064 nm and/or 532 nm outputs) 2)
Laser pulse repetition rate (PRRL) range 3)
30 kHz
200 – 1000 kHz
300 – 1000 kHz
400 – 1000 kHz
Pulse repetition rate after frequency divider
PRR = PRRL / N, N=1, 2, 3, … , 1025
Maximal average output power 4)
at 1064 nm
6 W
25 W
50 W
80 W
at 532 nm
3 W
12 W
25 W
40 W
at 355 nm
2 W
8 W
18 W
30 W
Pulse energy at lowest PRRL 4)
at 1064 nm
200 µJ
125 µJ
165 µJ
200 µJ
at 532 nm
100 µJ
60 µJ
85 µJ
100 µJ
at 355 nm
75 µJ
40 µJ
60 µJ
75 µJ
Pulse contrast
at 1064 nm
> 300 : 1
at 532 nm
> 500 : 1
at 355 nm
> 1000 : 1
Power long term stability
over 8 h after warm-up (Std. dev.) 5)
< 1.0 %
Pulse energy stability (Std. dev.) 6)
at 1064 nm
< 1.0 %
at 532 nm
< 2.0 %
at 355 nm
< 2.5 %
Pulse duration (FWHM) at 1064 nm
10 ± 3 ps
Polarization
linear, vertical 100 : 1
M²
< 1.3
Beam circularity, far field
> 0.85
Beam divergence, full angle
< 1.5 mRad
Beam pointing stability (pk-to-pk) 7)
< 50 µRad
Beam diameter (1/e²) at 50 cm distance from laser aperture
at 1064 nm
1.8 ± 0.3 mm
at 532 nm
2.2 ± 0.3 mm
1.8 ± 0.3 mm
2.2 ± 0.3 mm
at 355 nm
2.0 ± 0.3 mm
1.8 ± 0.3 mm
2.0 ± 0.3 mm
Triggering mode
internal / external
Pulse output control
frequency divider, pulse picker, instant amplitude control, power attenuation
Control interfaces
keypad / USB / RS232 / LAN
OPERATING REQUIREMENTS
Mains requirements
100…240 V AC, single phase 47...63 Hz
Maximal power consumption
< 2.8 kW
< 2.8 kW
< 3.1 kW
< 3.5 kW
Operating ambient temperature
18 – 27 °C
Relative humidity
10 – 80 % (non-condensing)
Air contamination level
ISO 9 (room air) or better
PHYSICAL CHARACTERISTICS
Cooling
water
Laser head size (W × H × L)
single output
1064 nm 396 × 173 × 755 mm
single output
355 nm 396 × 173 × 1000 mm
3 outputs 1064 / 532 / 355 nm
396 × 173 × 926 mm
Power supply unit size (W × H × L)
553 × 1019 × 852 mm
Umbilical length
4 m
CLASSIFICATION
Classification according EN60825-1
CLASS 4 laser product
1) Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture.
2) Can be ordered either in a single output or in 2 or 3 separate harmonics outputs versions.
3) When frequency divider is set to transmit every pulse.
4) See typical power and energy curves for other pulse repetition rates.
5) At the lowest PRRL after warm-up under constant environmental conditions.
6) At the lowest PRRL under constant environmental conditions.
7) Beam pointing stability is evaluated as a movement of the beam centroid in the focal plane of a focusing elemen
PERFORMANCE
ORDERING INFORMATION
商品属性 [波长] 1064nm [脉宽] 10 ± 3 ps [脉冲能量] 165µJ [平均功率] 50W [重复频率] 300 – 1000 kHz