High Energy, Mobile, Tunable Wavelength Laser Source for Photoacoustic Imaging
FEATURES
▶ High up to 250 mJ output energy
▶ Wide tuning range from 330 to 600 nm and from 660 to 2300 nm
▶ 10 Hz or 20 Hz pulse repetition rate
▶ Integrated pump laser, OPO and PSU in single mobile unit
▶ Low maintenance cost
▶ Fiber bundle connectors with safety interlock
▶ Fast Wavelength Switching within entire Signal or Idler range between two consecutive pulses (optional)
▶ Electromechanical output shutter (optional)
▶ Integrated energy meter (optional)
▶ Motorized attenuator (optional)
▶ Access to pump laser wavelengths 1064/532 nm (optional)
▶ Signal and Idler through the same output (optional)
Following the demand for high output energies in the photoacoustic market for imaging larger volumes of tissue, PhotoSonus M, an updated high energy tunable laser source for photo-acoustic imaging, was introduced. Time-tested Ekspla nanosecond pump laser, parametric oscillator, power supply and cooling unit are integrated in a single robust housing to provide mobility, ease of use and low maintenance cost. The highly flexible PhotoSonus M platform makes it easily integrated and used in a photoacoustic imaging system. It is fully motorized and computer controlled, with user trigger outputs and inputs and special options such as motorized switching between OPO Signal and Idler, motorized attenuator, internal energy meter and electromechanical output shutter.
Recently, a fast wavelength switching option was introduced that enables each laser pulse to have a different wavelength within the entire signal or idler range and at any sequence. This new feature, combining high pulse energy (up to 180 mJ) and wide wavelength tuning range (330 – 2300 nm) makes PhotoSonus M the irreplaceable imaging source for any photo acoustic system.
For even higher sample imaging depth and resolution a PhotoSonus M+, with up to 250 mJ maximum pulse energy, was introduced.
For convenience, the outputs of PhotoSonus M and PhotoSonus M+ lasers can be coupled with almost any type of fiber bundle.
SAMPLE PHOTOACOUSTIC IMAGES
SPECIFICATIONS 1)
Model
PhotoSonus M-10
PhotoSonus M-20
PhotoSonus M+
OPO
Wavelength range
Signal
660 – 1064 nm
Signal Extended range (optional)
660 – 1300 nm
SH extension range (optional)
330 – 530 nm (330 – 659 nm 2) )
Idler (optional)
1065 – 2300 nm
OPO output MAX pulse energy 3)
> 180 mJ
> 160 mJ
> 250 mJ
Pulse repetition rate
10 Hz
20 Hz
10 Hz
Scanning step:
Signal (660 – 1064 nm)
0.1 nm
Idler (1065 – 2300 nm)
1 nm
Pulse duration 4)
3 – 5 ns
Signal linewidth
< 10 cm-1
< 20 cm-1
Typical signal beam diameter (1/e²) 5)
7 ± 2 mm
9 ± 2 mm
PHYSICAL CHARACTERISTICS
Unit size (W × L × H mm)
434 × 672 × 887 mm
OPERATING REQUIREMENTS
Room temperature
18 – 27 °C
Relative humidity
20 – 80 % (non-condensing)
Power requirements 6)
208 or 240 VAC, single phase 50/60 Hz
Power consumption
< 1.0 kVA
< 1.5 kVA
< 1.5 kVA
1) Due to continuous improvement, all specifications are subject to change without notice. The parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise all specifications are measured at 700 nm.
2) When Extended Signal range is selected.
3) Free space measurement at 700 nm. See tuning curves for typical outputs at other wavelengths.
4) FWHM measured with photodiode featuring 1 ns rise time and 300 MHz bandwidth oscilloscope.
5) Measured at the free space output at 700 nm. Can be adjusted as per request.
6) Mains voltage should be specified when ordering.
PERFORMANCE
DRAWINGS
商品属性 [脉宽] 3 – 5 ns (FWHM) [重复频率] 10 or 20 Hz [波长] from 330 to 600 nm and from 660 to 2300 nm