1060nm Optical Fiber Amplifiers
PriTel’s PM-YbFA Series of Optical Fiber Amplifiers are based on well-established diode pumped Ytterbium doped optical fiber technology. These amplifiers are available at various output power levels (18 to 33 dBm) in both polarization insensitive (Non PM) and polarization maintaining (PM) versions.
Remote Control Options
PriTel's Optical Fiber Amplifiers can be configured for remote control by a computer using interfaces such as Serial/RS-232, USB, GPIB and Ethernet.
Examples of Performance Configurations (Others available on Request)
Click heading for
specifications in PDF FormatYbFA-20
PM-YbFA-20
PM-YbFA-30
PM-YbFA-33
Saturated output power
20 dBm
20 dBm
30 dBm
33 dBm
Small signal gain
>20 dB @-15 dBm
>20 dB @-15dBm
>22 dB @ 7dBm
>25 dB @ 7dBm
Optical noise figure
<6 dB
<6 dB
<12 dB @ 0dBm
<14 dB @ 0dBm
Input power range
-10 to +20 dBm
-10 to +20 dBm
-10 to +20 dBm
-10 to +20 dBm
Wavelength range
1040-1070 nm
Spectral gain flatness
(single channel input)0.5 dB typical
0.5 dB typical
1.0 dB typical
1.5 dB typical
Optical
Gain medium
Yb-doped silica fiber
Pump source
910-980 nm diode laser
Connectors
FC/APC (other connectors available on request)
Environmental
Operating temperature
+15 to 30°C
Storage temperature
-20 to 50°C
Electrical/Mechanical
Operating Voltage
85-264 VAC at 47-63 Hz
Power consumption
<125 W
Dimensions (2U)
10 cm x 26 cm x 28 cm
10 cm x 26 cm x 36 cm
Weight
5 Kg
9 Kg
商品属性 [波长] 1040-1070 nm [输入功率] 30 dBm [输出功率] -10 to +20 dBm