Expanding your profiling capabilities
- Industry’s most cost-effective device.
- Minimum beam measurements down to 60 microns.
- Measures accurate position and profile.
- Maximum frame rate – over 50 Hz.
- Wide spectral range 350 - 1310 nm.
- Optional: Stand-Alone unit.
Specifications
Beam size range
⌀60 μm - ⌀5 mm
Spectral Response
350 - 1310 nm
Sensor Resolution
1280 x 1024
Optical dynamic range
Up to 1011 using all filters and software controlled electronic shutter and gain
Sensitivity
~0.5 nW/cm² @ 633 nm
~15,000 nW/cm²@ 1310 nm (15 μW/cm²)
Saturation
~1mW/cm², no filters
Power measuring
With user’s pre-calibration at a selected point
Dimensions
⌀63 mm x 51 mm deep
Environment Operating Temperature
0° – 35° C
Weight
300 gr with cable
Filters
1.6 mm thick, NG-4, NG-9, NG-10
Interface
USB 3.0
Sensor type
1/1.8" format
Sensor active area
6.78 (w) x 5.4 (h) mm (diagonal 8.7 mm)
Pixel size
5.3 μm (H) x 5.3 μm (V)
Shutter speed
9 – 200,000 μsec
Damage threshold
50 W/cm² with filters
Maximum frame rate
Over 50 Hz
Null
In CW mode, null function is available to automatically subtract background
Operation with pulsed lasers
Ability to capture and replay pictures and statistics from a slowly pulsing laser (1-100 Hz)
while filtering out frames with no laser pulse. Gain control and external filters make it easy
to obtain optimum intensity
Trigger
- Hardware Falling Edge
- Hardware Rising Edge
- Enable/Disable Trigger Delay
- Trigger Delay 0.015ms - 4.0 sec
Ordering Information
Model BEAMON-X-FW: Complete system with a camera, post, built-in filter wheel with a set of 3 filters (NG4,NG9,NG10) in housing, software on CD/Flash Drive, carrying case.
Host Computer Requirements
v> Win 7/8/10 OS, Pentium I3, RAM 4GB, USB 3.0, Min. Resolution 1366 x 766
商品属性 [波长] 350 - 1310 nm [光束尺寸] ⌀60 μm - ⌀5 mm