PSA3605 & PSA6005
PSA Series 5 portable RF Spectrum Analyzers, 3.6GHz and 6.0GHz
Bench-top performance, handheld convenience
- A big feature set in a small instrument
- The PSA Series 5 incorporates bench-top level features within in a portable spectrum analyzer.
- 10MHz to 3600MHz or 6000MHz frequency range
- Resolution bandwidths from 300Hz to 10MHz (1:3:10)
- <-120dBm noise floor at -40dBm ref. level and 10kHz RBW (better than -160 dBm per Hz)
- Measurement in dBm or dBµV, mV or µW
- Zero span mode with AM and FM audio demodulation
- Trace modes of normal, peak hold and trace average
- Live, View and Reference traces in contrasting colours
- Twin markers with readout of absolute & difference values
- Smart marker movement with selectable peak tracking
- Frequency counter with down to 10Hz resolution
- Frequency presets and independent state storage
- Auto-find automatically sets sweep parameters for the highest signal found
- Unlimited storage for waveforms, set-ups and screens
- User assignable file names, file stamping from real-time clock
- USB interfaces for Flash drives and PC connection
- Comprehensive status and context sensitive help screens
- True handheld size with weight of just 560 grams (20oz)
Option U02 additional features include:
- Limit lines and limit patterns with limits comparator
- Data logging of peak values, complete traces or screen images from timer, external trigger or limits comparator
- Automatic Measurements for CP, ACPR and OBW
- Scan Mode - high resolution capture of up to 210,000 points
- Waveform demodulation for AM and FM/PM signals
- Compensation tables, fixed offsets and 75W compensation
Technical Specifications - PSA3605 & PSA6005
FREQUENCY MEASUREMENT
Frequency Span
Frequency Range:
10 MHz to 3600 MHz (PSA3605) 10 MHz to 6000 MHz (PSA6005)
Setting Modes:
Centre frequency plus Span, or Start plus Stop frequencies
Maximum Span:
5990 MHz (PSA6005) 3590 MHz (PSA3605)
Minimum Span:
27 kHz, or Zero Span with demodulation
Set. Resolution:
100 Hz at any frequency
Setting Accuracy:
Reference Frequency Accuracy for Start, Stop & Centre (Zero-Span) frequencies
Reference Frequency Accuracy
Initial Accuracy:
Better than ± 1 ppm at 20℃
Stability:
Better than ± 1 ppm over 10℃ to 30℃
Ageing:
Better than ± 1 ppm per year
Phase Noise (Typical)
Carrier at 1 GHz:
-83 dBc/Hz at 30 kHz offset
-99 dBc/Hz at 100 kHz offset
-116 dBc/Hz at 1 MHz offset
Carrier at 3 GHz:
-94 dBc/Hz at 30 kHz offset
-109 dBc/Hz at 100 kHz offset
-117 dBc/Hz at 1 MHz offset
Carrier at 6 GHz
(PSA6005 only) :
-83 dBc/Hz at 30 kHz offset
-97 dBc/Hz at 100 kHz offset
-114 dBc/Hz at 1 MHz offset
Resolution Bandwidth
RBW:
Selectable between 10 MHz and 300 Hz
selectable in 1:3:10 sequence, or Auto
Video Filtering:
Selectable between 10 MHz and 300 Hz selectable in 1:3:10 sequence, or RBW Tracking
Markers
No. of Markers:
One, Two (or None)
Resolution:
0.1 kHz at all frequencies
Marker Accuracy:
1/270th of Span ± 10Hz plus reference frequency accuracy.
Readout:
The frequencies at the marker points and the frequency difference are displayed
Functions:
Normal (Scroll Mode), Peak Find Mode, Peak Track Mode, Frequency Measurement
Marker Frequency Counter
Frequency counted at the current active marker (M1 or M2) in sweep or zero-span mode
Resolution:
10Hz, 100Hz or 1kHz
Accuracy:
Reference frequency accuracy +/- 1 count for signal > noise level +25dB
Channel Markers (only with Option U02)
Channel markers are a special case of Limit Patterns (see Amplitude Limits within next section). Channel markers are vertical lines at frequency points defined within a file. Most commonly they will be used to mark channel centre frequencies or channel boundaries.
No. of Points:
Up to two files, each containing up to 49 points, can be displayed in differing colours.
Marker Files:
Files are created using PSA-Manager software. Up to 999 files can be stored.
AMPLITUDE MEASUREMENT
Amplitude Range
Units:
Selectable as dBm or dBµV
Display Range:
84 dB from reference level
Magnification:
x2, x5 or x10
Reference Level:
Selectable between -40dBm and +20 dBm (67dBµV to 127dBµV) in 1dB steps
Amplitude Accuracy
Calibration Level
Accuracy:
Better than ± 1 dB at 10dB below ref. level @ 2000MHz (20℃± 5℃)
Flatness:
Better than ± 1 dB relative to 2000MHz over the the full operating frequency range
Linearity:
Better than ± 1 dB over 60dB range down from the reference level
Markers
No. of Markers:
One, Two (or None)
Resolution:
0.1 dB
Readout:
The level at the marker points and difference are displayed.
Displayed Units:
dBm, dBuV, mV or uW
Functions:
Normal (Scroll Mode), Peak Find Mode, Peak Track Mode, Frequency Measurement
Displayed Average Noise Level (DANL)
DANL:
Better than – 120 dBm (-13 dBuV) average displayed noise floor (ref. level = – 40 dBm RBW = 10 kHz, VBW = 1 kHz, span 1 MHz) for frequency range 10MHz to 5.5GHz
Noise per Hz
Better than -160 dBm/Hz equivalent
Distortion and Spurii
3rd Order Intermodulation:
< –60dBc for two signals at 10dB below reference level, (500MHz and 502MHz) ; typically < -65dBc
Harmonic:
< –60dBc at 10dB below reference level (100MHz)
Signal Images:
<– 55dBc, typically <– 60dBc in ‘Normal’ image rejection mode for RBWs between 300Hz and 3MHz
Other Signal Related Spurii:
<-60 dBc for signals 10 dB below the reference level
Residual Spurii:
<-70 dB below the reference level
Amplitude Limits (only with Option U02)
Limit Types:
Limit lines from numeric values, or limit patterns from files.
No. of Limits:
Up to two limits can be displayed in differing colours.
Limit Patterns:
Pattern files are created using PSA-Manager software. Patterns are linearly interpolated from up to 40 frequency/amplitude points. Up to 999 patterns can be stored.
Limits Comparator:
Conditions of above, below, inside or outside of limits, creating actions of message, beep,stop sweep, log sweep and pulse out.
Amplitude Compensation (only with Option U02)
Offset:
Amplitude can be offset by up to +/-50 dB to compensate for external attenuation or gain.
75 W Comp.:
Compensation can be made for inputs from 75 W source impedance.
Tables:
Linearly interpolated compensation tables of up to 40 frequency/amplitude points can be used. Up to 999
SIGNAL INPUT
Input Connector:
N Type, 50 Ω
VSWR:
1.5 : 1 typical
Maximum Level:
+ 25 dBm, (132 dBµV); +/-50V DC
SWEEP
Sweep Method:
Detection for 271 points per sweep. The amplitude value (as determined by the detection mode) from each sub-span is stored (sub-span = span/270)
Signal Detection Modes:
Alternate Peak (default), Positive Peak, Negative Peak, Sample, Linear Average, Log Average or RMS
Signal Image Rejection Modes:
Real-time rejection with automatic or manual re-alignment or Data Comparison based rejection.
Sweep Time:
Sweep time is a automatic function of Span and RBW/VBW. A speed-up function enables the time to be reduced by a factor of up to ten.
Sweep Modes:
Repeat (continuous) or Single Shot
Sweep Trigger (only with Option U02)
Trigger Source:
External input or Limits Comparator.
Scan Mode (only with Option U02)
Scan Method:
High resolution capture of up to 210,000 points defined by span andRBW. Number of points = 3 x (Span/RBW) +1.
Scan Display:
Over-view display of whole scan with Zoom and Pan capability to magnify view up to 1 display point per capture point.
Marker:
Moveable marker with frequency readout. Pan/Zoom around marker point. Amplitude readout at maximum magnification.
File Storage:
Scan files can be saved under automatic or user defined names and recalled to the screen or exported to external programs.
DEMODULATION (Zero Span mode)
Audio Demodulation
Modes:
AM or FM
Internal Audio:
Internal loudspeaker with adjustable volume and mute.
Audio Out:
30 mW into 32 W mono or stereo headphones, adjustable volume, 3.5mm jack socket
Audio Filter:
Switchable 3kHz Low Pass Filter.
Carrier Display
Horizontal line at carrier level.
Waveform Demodulation (only with Option U02)
Display Modes:
AM modulation waveform
FM modulation waveform
Carrier waveform (against timebase)
Carrier level (horizontal line)
Timebase:
5 us/div to 20 ms/div (1:2:5 sequence)
Trigger:
Rising Edge / Falling Edge, Auto or Free Run
Markers:
Twin markers with delta readout
Marker Readout:
AM - absolute depth and difference depth
FM - absolute deviation and difference dev.
Carrier - absolute time and difference time
Marker Resolution:
0.01% AM, 10Hz FM
AM Measurement:
Modulation rate - 35 Hz to 100 kHz
Modulation depth: - 5% to 100%
Scale - 5% to 100% full scale, 1:2:5 sequence
FM Measurement:
Modulation rate - 35 Hz to 100 kHz
Deviation: - 1 kHz to 1 MHz
Scale - 1kHz to 1MHz full scale, 1:2:5 sequence
DISPLAY & TRACES
Display Type:
4.3 inch (10.9 cm) backlit TFT LCD, 480 x 272 pixels total, 16 colours, resistive touch screen.
Graticule:
8.5 x 10 divisions, light grey graticule.
Displayed Points:
271 points per sweep.
Live Trace:
Dot-joined trace from current sweep.
Trace Modes:
Normal (overwrite), Peak Hold, or Average (2 to 48 sweeps).
View Trace:
Buffered “instance” of the live trace.
Reference Trace:
Stored trace recalled from a trace file.
Dual Trace Mode:
For Peak Hold and Average modes, processed and un-processed traces can be displayed simultaneously.
DATA LOGGING (only with Option U02)
Data Types:
Peak level, Centre Level, Full Trace or Screen Image.
Data Entries:
Up to 25,000 entries per file (2500 for Images).
Trigger Source:
Entries can be made every sweep or in response to Manual Trigger key, External Trigger, Internal Timer or Limits Comparator.
Internal Timer:
Adjustable from 2secs. to 100mins per entry.
更多资料请联系我们
商品属性 [频率] 6.0GHz