785 NM NARROW LINEWIDTH LASER (HP VBG DIODE; SMA)
描述
This 785 nm laser features single-longitudinal-mode (SLM) and operates in multiple transversal modes. It used mainly in industrial applications of Raman spectroscopy, where high-power single-frequency operation is needed without the necessity of sharp focusing.
The transversal modes are distributed in one row, thus the fast axis can be focussed with M2 ~1.3, while the slow axis has multiple modes and its focusability is poor - theoretically, it can be focussed to a width of ~50 µm.
This laser is a Volume Bragg Grating (VBG) stabilized diode laser, which is distinguished by high electrical efficiency and exceptional wavelength stability.
产品规格
Parameter Minimum Value Typical Value Maximum Value Central Wavelength, nm
784.5
785
785.5
Longitudinal modes
-
Narrow Spectrum
-
Transversal modes
-
Multiple
-
Spectral line width FWHM, pm
-
30
50
Output power, mW
-
3501
-
Side-mode suppression ratio (SMSR), dB
40
50
60
Power stability, % (RMS, 8 hrs)
-
12
2
Power stability, % (peak-to-peak, 8 hrs)
-
23
3
Noise, % (RMS, 20 Hz to 20 MHz)
-
0.254
0.6
Transversal modes
-
TEM00
-
M2 effective
-
N/A
-
Polarization contrast
1000
1500
2500
Polarization direction
-
Vertical
-
Control interface type
-
UART/USB
-
Operation mode
-
APC (CW)
-
Modulation bandwidth, MHz
-
N/A
-
Input voltage, VDC
4.8
5
5.3
External power supply requirement
-
+5 V DC, 1.5 A
-
Dimensions, mm
-
50 x 30 x 18 5
-
Beam height from the base, mm
9.9
10.4
10.9
Heat-sinking requirement, °C/W
-
1
-
Optimum heatsink temperature, °C
15
20
30
Warm up time, mins (cold start)
0.2
1
2
Temperature stabilization
-
Yes
-
Overheat protection
-
2
-
Storage temperature, °C (non-condensing)
-10
-
50
Net weight, kg
0.1
0.12
0.14
Max. power consumption, W
0.4
2
10
Warranty, months (op. hrs)
-
14 (10000)6
-
RoHS
-
Yes
-
CE compliance
-
- General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC-
Laser Safety Class
-
3B
-
OEM lasers are not compliant with
-
IEC60825-1:2014 (compliant using additional accessories)
-
Country of origin
-
Lithuania
-
1 The output power of SLM lasers shall not be tuned and SLM performance is not guaranteed at power ratings other than factory preset. However, the power setting capability is not disabled. External attenuators are recommended instead.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 °C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 The long term power test is carried out at constant laser body temperature (+/-0.1 °C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 Excluding control interface pins and an output window/fiber assembly.
6 Whichever occurs first. The laser has an integrated operational hours counter.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical spectrum
Typical spectrum of 0785 nm diode laser. Measured with 20 pm resolution.
Drawing
商品属性 [波长] 785nm [功率] 350mW [输出类型] HP VBG DIODE; SMA