915 NM LASER (DIODE; FREE-SPACE)
Description
915 nm infrared free-space laser of the MatchBox series. High long-term power stability is ensured by TEC thermal stabilization, as well as thermal and optical feedbacks.
Specifications
Parameter Minimum Value Typical Value
Maximum Value Central Wavelength, nm
912
915
918
Longitudinal modes
-
multiple
-
Spectral line width FWHM, nm
-
0.5
1
Output power, mW
-
2001
-
Power stability, % (RMS, 8 hrs)
-
0.22
1
Power stability, % (peak-to-peak, 8 hrs)
-
2 3
3
Noise, % (RMS, 20 Hz to 20 MHz)
-
0.254
0.6
Transversal modes
-
TEM00
-
Beam Diameter at Aperture (1/e2), mm
-
1
-
Beam divergence (full angle)
-
less than 1.1 mrad
-
M2 horizontal axis
-
1.1
1.4
M2 vertical axis
-
1.2
1.5
M2 effective
-
1.2
1.5
Polarization direction
-
Vertical5
-
Polarization contrast
1000
2000
5000
Control interface type
-
UART/USB
-
Operation mode
-
APC (CW)
-
Modulation bandwidth, MHz
-
optional 6
-
Input voltage, VDC
4.8
5
5.3
External power supply requirement
-
+5 V DC, 1.5 A
-
Dimensions, mm
-
50 x 30 x 18 7
-
Beam height from the base, mm
9.9
10.4
10.9
Heat-sinking requirement, °C/W
-
1
-
Optimum heatsink temperature, °C
15
20
30
Warm up time, mins (cold start)
0.1
0.5
1
Temperature stabilization
-
Yes
-
Overheat protection
-
Yes
-
Storage temperature, °C (non-condensing)
-10
-
50
Net weight, kg
0.1
0.12
0.14
Max. power consumption, W
0.4
2
10
Warranty, months (op. hrs)
-
14 (10000) 8
-
RoHS
-
Yes
-
CE compliance
-
- General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC-
Laser Safety Class
-
3B
-
OEM lasers are not compliant with
-
IEC60825-1:2014 (compliant using additional accessories)
-
Country of origin
-
Lithuania
-
1 The optical power can be tuned from virtually 0% to 100%. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 °C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 The long term power test is carried out at constant laser body temperature (+/-0.1 °C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 For lasers without integrated optical isolators.
6 TTL digital modulation up to 10 MHz.
7 Excluding control interface pins and an output window/fiber assembly.
8 Whichever occurs first. The laser has an integrated operational hours counter.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical spectrum
Typical spectrum of 0915 nm diode laser. Measured with 20 pm resolution.
Typical Near Field
Typical near field (0.45 m from output aperture) beam profile. Non-
circularized beam of a 0915 nm direct diode laser.
Typical Far Field
Typical far field (2.75 m from output aperture) beam profile. Non-
circularized beam of a 0915 nm direct diode laser.
Drawing
商品属性 [波长] 915nm [功率] 200mW [输出类型] DIODE; FREE-SPACE