DIODE LASER COMBINER; MM FIBER (405nm, 488nm, 638nm)
描述
It is a wavelength combiner featuring 3 laser diodes integrated within ultra compact 'Matchbox®' housing. Classical dichroic mirror combining technique is used in combination with our proprietary micro-optics assembly to make this system both economical and compact. All optics and electronics are fitted into the ultra compact 'Matchbox' housing. An easy to use PC interface and separate TTL inputs allows full control over the individual wavelengths.
This wavelength combiner provides up to four wavelengths, which are standard for use in Life Sciences, Food sorting, Metrology and Medical applications. Unit combines wavelengths into a MM output fiber. An easy to use PC interface allows full control over the individual wavelengths.
Features:
Three wavelengths
Plug-and-play
Single user interface for all 3 lasers
Advantages:
Space saving design
No optics realignment
Remote PC control
Applications:
Wide field and Fluorescence Microscopy
Flow cytometry
Food sorting and quality
Particle characterization
产品规格
Parameter Minimum
Value
Typical Value Maximum
Value
Output power, mW
-
405 nm - 100
488 nm - 25
638 nm - 100-
Wavelength Tolerance
-
+/-4 nm
-
Fiber Core Diameter
-
105 μm, 200 μm, 400 μm
-
Power stability, % (RMS, 8 hrs)
-
<1
1-
Longitudinal Modes
-
Multiple
-
Spectral line width FWHM, nm
-
<1.5
-
Noise, % (RMS, 20 Hz to 20 MHz)
-
<1
2-
Transversal Mode
-
multimode (top-hat-like)
-
Control Interface
-
UART
3-
Operation Mode
-
ACC (CW)
-
Input voltage, VDC
-
+9
-
External Power Supply Requirement
-
+9 V DC, 1.5 A
-
Dimensions, mm
-
50 x 30 x 18
-
Heat-sinking requirement, °C/W
-
<0.5
-
Optimum heatsink temperature, °C
-
20
-
Warm-up Time (Cold Start)
-
< 1 min
-
Temperature Stabilization
-
Yes
-
Overheat Protection
-
Yes
-
Storage temperature, °C (non-condensing)
-
-
-
Net weight, kg
-
0.2
-
Max. power consumption, W
-
2
-
Warranty, months (op. hrs)
-
14 (10000) 4
-
RoHS
-
Yes
-
CE Compliance
-
- General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC
-
OEM Lasers Are Not Compliant With
-
IEC60825-1:2014 (compliant using additional accessories)
-
1 The long term power test is carried out at constant laser body temperature (+/-0.1 °C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
2 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
3 The break-out-box AM-C9 can be used for conversion of UART communication to USB.
4 Whichever occurs first.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Drawing
商品属性 [波长] 405nm, 488nm, 638nm [功率] 100mW,25mW,100mW