514.5 NM NANOSECOND SLM LASER
描述
514.5 nm nanosecond SLM laser is a substitute for Argon lasers in many applications, including sorting, illumination, and pump-probe spectroscopy. Extreme pulse-to-pulse stability ensures consistent experiment results. The 514.5 nm laser is offered in a very compact package, which is based on the famous MatchBox platform. Pulse-on-demand operation makes this laser suitable for various setups, where synchronization is a must.
Other potential applications of this laser are:
pumping of Ti:Sapphire lasers,
supercontinuum generation
deep UV generation
Raman shift excitation in H2 filled fibers
SLM operation ensures high pulse-to-pulse stability, low jitter, and extremely stable harmonic generation.
Dual wavelength option 1029+514.5 nm is available on request.
产品规格
Parameter Minimum Value Typical Value Maximum Value Central Wavelength, nm
514.3
514.5
514.7
Longitudinal modes
-
single
-
Spectral line width FWHM, pm
0.5
0.8 1
1
Output power, mW
-
As per request
150
Pulse duration, ns
1.5
3
10
Repetition rate, kHz (depending on pulse energy)
-
As per request
35
Pulse energy, µJ
3
As per request
25
Power stability, % (RMS, 8 hrs)
-
0.52
1
Pulse-to-pulse stability, %
-
2
5
Transversal modes
-
TEM00
-
Beam Diameter at Aperture (1/e2), mm
-
1
-
Beam divergence (full angle), mrad
-
1
1.1
M2 effective
-
1.1 3
1.4
Polarization direction
-
Horizontal 4
-
Polarization contrast
-
better than 500:1
-
Control interface type
-
UART 0
-
Operation mode
-
APC (Free-run) or
ACC (Single-Shot triggering)5-
Input voltage, VDC
-
5
-
External power supply requirement
-
+5 V DC, 5A
-
Dimensions (L-W-H), mm
-
50 x 30 x 18 6
-
Beam height from the base, mm
-
10.4
-
Heat-sinking requirement, °C/W
-
<0.5
-
Optimum heatsink temperature, °C
-
20
-
Warm up time, mins (cold start)
-
10
-
Temperature stabilization
-
Yes
-
Overheat protection
-
Yes
-
Storage temperature, °C (non-condensing)
-
-
-
Net weight, kg
-
0.29
-
Max. power consumption, W
-
25
-
Warranty, months (op. hrs)
-
14 (10000) 7
-
Residual IR wavelength contrast, dB
-
10
-
Laser Safety Class
-
3B
-
RoHS
-
Yes
-
CE compliance
-
- General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC-
OEM lasers are not compliant with
-
IEC60825-1:2014 (compliant using additional accessories)
-
Country of origin
-
Lithuania
-
1 Measured with a scanning Fabry-Perot interferometer having 7.5 Mhz resolution, with scanning frequency of about 10 Hz. Interferometer testing is not provided for each laser being manufactured, the standard test is OSA measurement with 10-20 pm resolution instead.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 °C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 M2 parameter is typically worse for higher pulse energy laser configurations.
4 For lasers without integrated optical isolators.
0 Break-out-boxes AM-C8 and AM-H10 can be used for conversion of UART communication to either USB or RS232.
5 Operation mode must be specified upon ordering. Different operation modes require different electronics to be installed. Free-run mode is not triggerable and repetition rate can be changed by changing average optical power. Single-shot triggering in ACC mode is typically run at frequencies up to 100 Hz.
6 Excluding control interface pins and an output window/fiber assembly.
7 Whichever occurs first. The laser has an integrated operational hours counter.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical spectrum
Typical spectrum of 0515 nm passive Q-Switch DPSS laser. Measured with 20 pm resolution.
Typical Near Field
Typical Far Field
Drawing
The key dimensions of a free-space MatchBox.
商品属性 [波长] 514.5nm [脉宽] 3ns