Dispersion Compensation
Pulse Compression & Dispersion Compensation with femtoControl for Femtosecond Pulses
Pulse Compression & Dispersion Compensation for Microscopy
Dispersion Control
femtoControl is a motorized dispersion compensation unit for optimization of the duration of femtosecond laser pulses.
A compact boxed system for the spectral range of Ti:Sa lasers is available off the shelf. For applications that require extreme GDD compensation, whether in 2P or 3P microscopy, a range of customer specific solutions are available.
Femtosecond pulses which pass through any kind of optical material experience dispersion that can lead to temporal broadening of the ultrashort pulses with subsequent reduction in peak power. Thus, the experimental conditions are changed and degraded. femtoControl compensates for material dispersion by applying the inverse amount of dispersion to the pulse. This is generated by a pair of prisms on motorized translation stages allowing continuous adjustment of the pulse length.
At a Glance
Ideal for two-photon microscopy
Three-photon microscopy available with customized setups
Wide range of dispersion compensation
User-friendly operation
Zero GVD (Group Velocity Dispersion) function
Automated prism drive corresponding to stored GVD curves
Also available as femtoControl Kit to cover extreme GDD (Group Dispersion Delay) ranges as well as special wavelengths
Dispersion Correction for Multi-photon Microscopy
femtoControl can help to achieve more crisp and clearer microscope images especially for multi-photon microscopy. Laser pulses with a pulse duration in the ultrafast range. i.e. < 10 picoseconds (ps) are stretched by the dispersion of the optical material when passing through optical components like windows or lenses. Elaborate dispersion management by the means of a pulse compressor can compensate this effect. APE developed femtoControl, a compact pulse compressor for efficient, easy-to-use and remote controlled optimization of the pulse duration. FemtoControl operates following the principle of a four-prism compressor. Without further adjustment and without changing the interval between the prisms femtoControl is able to continuously compensate negative as well as positive dispersion that Ti:Sapphire laser pulses in the wavelength range of 690 to 1100 nm with input lengths between 80 to 200 femtoseconds (fs) may suffer from.
Specifications
femtoControl Specification Wavelength range
680 ... 1080 nm
Other wavelengths can be realized with the femtoControl Kit
1300 ... 1700 nm can be realized on requestBeam diameter
< 4 mm
Transmission
> 90 % @ 800 nm
Input Polarization
linear / horizontal (polarization rotator optional)
Laser Repetition Rate
any
Bandwidth (for Total Compensation)
< 12.5 nm @ 800 nm
(approx. 75 fs transform limited Gaussian pulse;
higher bandwidth on request)Dispersion Range
Center Wavelength
min
max
700 nm
0 ...
approx. 23000 fs^2
800 nm
0 ...
approx. 13000 fs^2
900 nm
0 ...
approx. 8000 fs^2
Dispersion Ranges that require very large beam
paths can be easily realized with the
femtoControl KitAdditional Internal Beam Path
1.67 m
femtoControl Kit Dispersion Ranges that require very large
beam paths as well as special wavelength ranges
can be easily realized with the femtoControl Kit
描述 [描述] Pulse Compression & Dispersion Compensation with femtoControl for Femtosecond Pulses