PIXIS-XO Soft X-Ray Cameras
he PIXIS-XO series of fully integrated imaging cameras utilizes back-illuminated (BI) CCDs without AR coating, for direct detection of the widest range of X-rays between ~ 10 eV and 30 keV (AR coated CCDs are not useful for X-ray energies < 500eV). With a 2048 x 512 imaging array, 13.5 µm pixels, 100% fill factor, low noise electronics and -75° C thermoelectric cooling with either air or water, this system is ideal for worry-free operation in research and OEM environments. The rotatable conflat flange with high-vacuum-seal design, software selectable gains and readout speeds make these cameras well suited for ultra-high vacuum applications.
FEATURES
BENEFITS
Back-illuminated CCD, with no AR coating
Provides very low X-ray flux imaging, high sensitivity and high spatial resolution
2 Mhz / 16-bit readout
100 kHz / 16-bit readout
High speed readout for rapid image acquisition; Slow speed readout for high sensitivity
with wide dynamic range, high signal-to-noise ratio (SNR) and excellent energy resolution
Software selectable gains for each digitization speed
Allows optimization of system performance for lowest noise to highest SNR
2048 x 512 image area,
13.5 x 13.5 µm pixels
Spectroscopy format designed for high frame rate imaging
Ultra low noise electronics
Best possible system performance
Flexible user-selectable binning & readout
Total flexibility to optimize experiments and SNR
Kinetics
Custom readout mode offers microsecond resolution
Deep thermoelectric air cooling
Maintenance-free operation - No need for a liquid circulator or additional power supply
Deep thermoelectric water cooling
Vibration free operation
Conflat vacuum interface
Industry-standard, high-vacuum compatibility
TTL input and output
External Trigger input with programmable polarity;
TTL output with exposure or readout monitor
USB 2.0 interface
Seamless, plug-and-play connection to PC notebooks & desktops; Easy OEM integration
Optional: WinView/Spec software (for Windows
XP/7; 32-bit)
or LightField® (for Windows 7; 64-bit)
Powerful, yet easy-to-use software packages for acquisition, display and analysis;
Powerful yet intuitive interface; Direct stream to hard drive
PVCAM/PICAM interface
Universal programming interface for easy custom programming; Compatible with
Windows XP/7 (32-bit), Windows 7 (64-bit) and Linux; PICAM for Windows 7 (64-bit)
LabView® Scientific Imaging ToolKit (SITKTM)
Predefined VIs for easy integration of camera controls into large experiment
Applications:X-ray Spectroscopy, EUV Lithography and X-ray Plasma Diagnostics
SPECIFICATIONS
PIXIS-XO: 2KB/2KBUV
CCD Image Sensor
e2v CCD42-10; scientific grade 1; MPP;
BI-basic process (B), BI-enhanced process (BUV);
no AR coating; for sensitivity between ~10 eV to 30 keV
Dark current @ -75° C
(with ambient air @ +20° C)
0.001 e-/p/sec (typical)
0.006 e-/p/sec (max)
CCD format
2048 x 512 imaging pixels; 13.5 x 13.5 mm pixels; 100% fill factor; 27.6 x 6.9 mm (optically centered)
Deepest cooling temperature,
TE air cooling*
(with ambient air @ +20° C)
-75° C typical; -70° C guaranteed
Thermostating precision
±0.05° C
Cooling method
Thermoelectric air or liquid cooling (CoolCUBE II required)
Full well
Single pixel:100 ke- (typical), 60 ke- (minimum)
High Sensitivity node: 250 ke- (typical), 220 ke- (minimum)
High Capacity node: 750 ke- (typical), 600 ke- (minimum)
ADC speed/bits
100 kHz/16-bit and 2 MHz/16-bit
System read noise @100 kHz
@2 MHz
3.5 e- rms (typical),6 e- rms (max)
14 e- rms (typical), 20 e- rms (max)
Vertical shift speed
15.2 msec/row (programmable)
Non-linearity
<1% @ 100 kHz
<2% @ 2 MHz
Software selectable gains
1.5, 3, 6 e- (high sensitivity); 3, 6, 12 e- (high capacity); available at all speeds
Operating systems supported
Windows XP/Vista/7; Linux
Data interface
USB2.0 (5m interface cable provided); Optional Fiberoptic interface is available for remote operation
I/O signals
Two MCX connectors for programmable frame readout, shutter, trigger in
Operating environment
+5° C to +30° C non-condensing
Bakeout temperature
70° C (maximum)
Vacuum Compatibility
10 -8 Torr
Certification
CE
Dimensions / Weight
15.1 cm (5.95“) x 11.81 cm (4.65“) x 11.45 cm (4.50“) (L x W x H) / 3.2 kg (7.0 lbs)**
NOTES:All specifications subject to change
* The minimum temperature attainable is dependent on the vacuum condition - temperature can be lowered w/lower vacuum
* The weight of the camera is with 4.5“ Conflat flange and air cooling.
Spectral Rates
@ 100 kHz
35 spectra/sec (FVB)
@ 2 MHz
90 spectra/sec (FVB)
Quantum Efficiency Curves
OUTLINE DRAWING
4.5" Conflat
6" Conflat
商品属性 [CCD Image Sensor] e2v CCD42-10; scientific grade 1; MPP; BI-basic process (B), BI-enhanced process (BUV); no AR coating; for sensitivity between ~10 eV to 30 keV [CCD format] 2048 x 512 imaging pixels; 13.5 x 13.5 mm pixels; 100% fill factor; [Dark current] 0.001 e-/p/sec (typical) 0.006 e-/p/sec (max) [Imaging area] 27.6 x 6.9 mm (optically centered)