E-665 Piezo Amplifier / Servo Controller Display, Analog & Digital Interface
• Integrated 24-Bit USB Interface
• Network capability with up to 12 channels
• Peak current 360 mA
• Notch filter for higher bandwidth
• Position control with strain gauge
or capacitive sensor
• Table for User-Defined Curves
• Additional Analog Interface
Specifications
E-665.SR / E-665.CR
Function
Piezo amplifier & position servo-controller with digital interface
Axes
1
Sensor
Servo characteristics
P-I (analog), notch filter
Sensor type
SGS (.SR) / capacitive (CR)
Amplifier
Control input voltage range
-2 to +12 V
Output voltage
-30 to +130 V
Peak current, <20 ms
360 mA
Average current
150 mA
Current limitation
Short-circuit-proof
Noise, 0 to 100 kHz
0.5 (.SR) / 4.0 (.CR) mVrms
Voltage gain
10 ±0.1
Input impedance
100 kΩ
Interface and operation
Communication interfaces
USB, RS-232 (9-pin Sub-D connector, 9.6 - 115.2 kBaud), 24-bit A/D and 20-bit D/A
Piezo connector
LEMO ERA.00.250.CTL (.SR) / Sub-D special (.CR)
Sensor connection
LEMO EPL.0S.304.HLN (.SR) / Sub-D special (.CR)
Analog input
BNC
Sensor monitor socket
BNC
Controller network
up to 12 channels, parallel
Supported functionality
Wave table; 256 data points, external trigger, up to 16 macros
Display
2 x 4½ digit, LED
DC Offset
10-turn pot., adds 0 to 10 V to Control In
Miscellaneous
Operating temperature range
5 to 40 °C
Overtemp protection
Deactivation at 85 °C
Dimensions
236 mm × 88 mm × 273 mm + handles
Mass
2.5 kg
Operating voltage
115 VAC / 230 VAC, 50-60 Hz (linear power supply)
Max. power consumption
60 W
Ask about custom designs!
Ordering Information
E-665.CR Piezo Amplifier / Servo Controller, 1 Channel, USB, RS-232, -30 to 130 V, Capacitive Sensor
E-665.S0 PIFOC® Piezo Amplifier / Servo Controller, 1 Channel, -30 to 130 V, SGS Sensor
E-665.SR Piezo Amplifier / Servo Controller, 1 Channel, USB, RS-232, -30 to 130 V, SGS Sensor
商品属性 [集成传感器] SGS (.SR) / capacitive (CR) [工作温度] 5 to 40 °C