E-625 Piezo Servo-Controller & Driver
Compact Bench-Top Device with High-Speed Interface
• Integrated 24-Bit USB Interface
• Network capability with up to 12 channels
• Peak current 120 mA
• Position control with strain gauge or capacitive sensor
• Notch filter for higher bandwidth
• Table for User-Defined Curves
• Additional Analog Interface
Specifications
E-625.SR / E-625.CR Function
Piezo amplifier / servo controller
Axes
1
Sensor Servo characteristics
P-I (analog), notch filter
Sensor type
SGS (.S) / capacitive (.C)
Amplifier Control input voltage range
-2 to +12 V
Min. output voltage
-30 to +130 V
Peak current, <50 ms
120 mA
Average current
60 mA
Current limitation
Short-circuit-proof
Noise, 0 to 100 kHz
0.8 mVrms Voltage gain
10 ±0.1
Input impedance
100 kΩ
Interfaces and operation Interface / communication*
USB, RS-232 (9-pin Sub-D connector, 9.6 - 115.2 kBaud), 24-bit A/D and 20-bit D/A
Piezo connector
LEMO ERA.00.250.CTL (.SR) / Sub-D special (.CR)
Sensor connection
LEMO EPL.0S.304.HLN (.SR) / Sub-D special (.CR)
Control input sockets
SMB
Sensor monitor socket
SMB
Controller network
up to 12 channels
Command set*
PI General Command Set (GCS)
User software*
PIMikroMove
Software drivers*
LabVIEW driver, dynamic libraries for Windows (DLL) and Linux
Supported functionality*
Wave table, 256 data points, external trigger, up to 16 macros
Miscellaneous Operating temperature range
5 to 50 °C
Overtemp protection
Deactivation at 75 °C
Dimensions
205 mm × 105 mm × 60 mm
Mass
1.05 kg
Operating voltage
12 to 30 V DC, stabilized
Current consumption
2 A
* E-625.S0 and E-625.C0 without digital interface.
Ordering Information
E-625.CR Piezo Amplifier / Servo Controller, 1 Channel, -30 to 130 V, Capacitive Sensor, USB, RS-232
E-625.SR Piezo Amplifier / Servo Controller, 1 Channel, -30 to 130 V, SGS Sensor, USB, RS-232
E-625.C0 PIFOC® Piezo Amplifier / Servo Controller, 1 Channel, -30 to 130 V, Capacitive Sensor
E-625.S0 PIFOC® Piezo Amplifier / Servo Controller, 1 Channel, -30 to 130 V, SGS Senso
商品属性 [集成传感器] SGS (.S) / capacitive (.C) [工作温度] 5 to 50 °C