BROADBAND LINEAR AMPLIFIER
Model P100
HIGH VOLTAGE
±50VGAIN
10x
HIGH CURRENT
2 A
HIGH SLEW RATE
30 V/µsPOWER BANDWIDTH
DC to ca 100 kHzSMALL SIGNAL BANDWIDTH
DC to >300 kHz
GENERAL DESCRIPTION
The P100 is a general purpose linear amplififier with high voltage and high output current. Intended applications are piezoelectric positioning, electrostatic transducers and other high voltage instrumentation.
INPUT AMPLITUDE
The P100 amplififier has a fifixed gain of x10 and the input resistance of 1 MΩ The input amplitude should be within -10…+10 V giving output voltage in the range -100…+100V. Higher input voltage will be limited to -10…+10 V range by the input protection circuit. Above ca 300% overvoltage at the input a microfuse may be blown. In such a case there will be no signal at the output (see below). For your convenience one spare fuse is provided on the amplifier’s printed-circuit board inside the enclosure.
FREQUENCY RESPONSE
SUMMARY OF TECHNICAL DATA
Bandwidth:
DC to about 200 kHz at 100 Vpp
Amplifification:
10 times fifixed
Load: type
resistive || capacitive
Impedance: input
output
1 MΩ || <30 pF 1 Ω in the linear mode
Voltage: input
nominal ±5 V maximum ±10 V
Current: output
maximum 2 A
Slew Rate: output
ca 30 V/µs at 50 Ω load
Input protection fuse
15 mA (Littelfuse, part number 272.015) one spare fuse provided inside the instrument, additional fuses available from Littelfuse resellers or from FLC Electronics AB.
Operating Ambient Temperature:
0°C to 30°C
Storage Temperature:
0°C to 60°C
Relative Humidity:
up to 90% (operation) 30% to 50% (storage)
Power Requirements:
100/110 V or 220/230 V, 50/60 Hz
Fuse:
100/110 V: 4 A (slow), 220/230 V: 2 A (slow)
Dimensions (H/W/L):
112 x 255 x 316 (mm)
Weight:
6 kg
Country of Origin:
Sweden
Note: Specififications apply to instruments operating at 23°C±5°C ambient temperature after 15 min. warm-up time. Due to ongoing product development, specififications are subject to change without notice.
商品属性 [频率] DC to about 200 kHz at 100 Vpp