1029 NM NANOSECOND SLM LASER
描述
1029 nm nanosecond SLM laser module is a turnkey laser featuring single frequency operation, extremely high pulse-to-pulse stability yet in a very compact package. High pulse energy and pulse-on-demand operation make this laser suitable for sorting, illumination, and pump-probe spectroscopy applications.
Other potential applications of this laser are:
seeding high power fiber lasers
seeding optical parametric amplifiers
supercontinuum generation
UV generation
SLM operation ensures high pulse-to-pulse stability, low jitter, and extremelly stable harmonic generation.
产品规格
Parameter Minimum Value Typical Value Maximum Value Central Wavelength, nm
1029
1029.5
1030
Longitudinal modes
-
single
-
Spectral line width FWHM, pm
0.5
0.8 1
1
Output power, mW
-
As per request
300
Central wavelength stability, pm (per hour, at stable body temperature)
-
1
2
Pulse duration, ns
1.5
3
10
Repetition rate, kHz (depending on pulse energy)
-
As per request
35
Pulse energy, µJ
-
As per request
35
Power stability, % (RMS, 8 hrs)
-
0.5 2
1
Pulse-to-pulse stability, % RMS
-
2
5
Transversal modes
-
TEM00
-
Beam Diameter at Aperture (1/e2), mm
-
1
-
Beam divergence (full angle), mrad
-
1
1.1
M2 effective
-
1.1
1.2
Polarization direction
-
Horizontal 3
-
Polarization contrast
-
better than 500:1
-
Control interface type
-
UART 0
-
Operation mode
-
APC (CW)
-
Input voltage, VDC
-
5
-
External power supply requirement
-
+5 V DC, 5A
-
Dimensions (L-W-H), mm
-
50 x 30 x 18 4
-
Beam height from the base, mm
-
10.4
-
Heat-sinking requirement, °C/W
-
<0.5
-
Optimum heatsink temperature, °C
-
20
-
Warm up time, mins (cold start)
-
10
-
Temperature stabilization
-
Yes
-
Overheat protection
-
Yes
-
Storage temperature, °C (non-condensing)
-
-
-
Net weight, kg
-
0.29
-
Max. power consumption, W
-
25
-
Warranty, months (op. hrs)
-
14 (10000)5
-
RoHS
-
Yes
-
CE compliance
-
- General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC-
Laser Safety Class
-
3B
-
OEM lasers are not compliant with
-
IEC60825-1:2014 (compliant using additional accessories)
-
1 Measured with a scanning Fabry-Perot interferometer having 7.5 Mhz resolution, with scanning frequency of about 10 Hz. Interferometer testing is not provided for each laser being manufactured, the standard test is OSA measurement with 10-20 pm resolution instead.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 °C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 For lasers without integrated optical isolators.
0 Break-out-boxes AM-C8 and AM-H10 can be used for conversion of UART communication to either USB or RS232.
4 Excluding control interface pins and an output window/fiber assembly.
5 Whichever occurs first. The laser has an integrated operational hours counter.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical spectrum
Typical spectrum of 1030 nm passive Q-Switch DPSS laser. Measured with 20 pm resolution.
Typical Near Field
Typical Far Field
Drawing
商品属性 [波长] 1029.5 nm [脉宽] 3ns