PY-IV-C-A
SP90404
Pyroelectric array detector, chopped, Grade A, one Gigabit Ethernet port, BeamGageProfessional GigE to USB3 adaptor, hard shipping case, 3 meter GigE cable, and power supply w/locking connector included.
Pyrocam IV Beam Profiling Camera
The Pyrocam camera accurately captures and analyzes wavelengths from 13nm - 355nm and 1.06-3000µm with its broadband array. It features a solid state high-resolution array with a wide dynamic range, fast data capture rates, and operates in CW or Pulsed modes which makes it ideal for analysis of NIR, CO2, and THz sources.
High-Resolution 80µm pixel pitch
Integrated Chopper for CW Beams
Interchangeable Windows for a Wide Variety of Applications
BeamGage professional software included
Application
UV and IR MIR(1)
Spectral response
13 - 355nm 3 - 5µm
1.06 - 3000µm
Interchangeable windows
See selection in Ordering section
Detector array details
Active area
25.6mm x 25.6mm
Element spacing
80µm x 80µm
Number of elements
320 x 320
Pixel size
75µm x 75µm
CHOPPED CW OPERATION
Chopping frequencies
25Hz, 50Hz
Sensitivity (RMS noise limit)
64nW/pixel (25Hz)
96nW/pixel (50Hz)
1.0mW/cm² (25Hz)
1.5mW/cm² (50Hz)
Noise equivalent power (NEP)
13nW/Hz 1/2 /pixel (1Hz)
Saturation power
3.0W/cm²(25Hz) 4.5W/cm² (50Hz)
Damage threshold power
Over entire array
2W
Peak Power Density
8W/CM² (Chopped mode)4W/CM² (CW in pulsed mode)
PULSED OPERATION
Laser pulse rate
Single-shot to 1000Hz
Pulse width
1fs - 12.8ms
Sensitivity (peak noise limit)
0.5nJ/pixel 8µJ/cm²
Saturation energy
15mJ/cm²
Damage threshold
20mJ/cm² (1ns pulse)
600mJ/cm² (1 ms pulse)
Trigger input
High logic level
3.5 - 6.0V DC
Low logic level
0 - 0.8V DC
Pulse width
4µs min
Trigger
Supports both trigger and strobe out
Photodiode trigger
InGaAs response: SP90409
OPERATING CONNECTIONS AND CONDITIONS
Power
12VDC
Line frequency
60/50Hz External Supply
Power consumption
12W
Operating temperature
5°C to 50°C
PHYSICAL
Case Dimensions
147.3mm H X 147.1mm W X 55.2mm D
Detector Position
53.8mm from bottom left 36.8mm from bottom
19.7 ± .75mm behind front cover Tilt <2
Weight
1.2kg (2.65lbs);; not including power supply
PC interface
Gigabit Ethernet (IEEE 802.3ab), GigE Vision complian
MEASUREMENTS PERFORMED
Comes with BeamGage PRO
Extensive set of quantitative and image display capabilities. See BeamGage data sheet.
Array Quality
Grade A <300 bad pixels,all correctable No uncorrectable cluster
Drawings
Ordering
PY-IV-C-A
SP90404
Pyroelectric array detector, chopped, Grade A, one Gigabit Ethernet port, BeamGageProfessional GigE to USB3 adaptor, hard shipping case, 3 meter GigE cable, and power supply w/locking connector included.
PY-IV-C-MIR PRO
SP90414
Pyroelectric array detector, chopped, Grade A, one Gigabit Ethernet port, BeamGage Professional GigE to USB3 adaptor, hard shipping case, 3 meter GigE cable, and power supply w/locking connector included.
BeamGage Training DVD
SP90429
How to become a great user of the world’s most powerful laser beam analysis software https://youtu.be/w9JkKIXcF5s
商品属性 [波长] 13-355nm, 1.06-3000μm [光束尺寸] 1600μm - 25.4mm [兼容的光源] CW, Pulsed [传感器] Pyroelectric Array